Installing the sandpaper on your wheel
Poke holes in the wet/dry sandpaper
Choose the spot you want to put the bolt and mark it
Lay the sandpaper on the outside of the track
Use one nut and bolt in each corner of the sandpaper
From the inside of the wheel
Push bolt through the track
Do this at each corner
Tighten nut onto the bolt
Make sure the head of the bolt is inside the wheel and the nut is placed on the outside.
If you decide to use two pieces of sandpaper, place the second directly across from the first.
NOTE: It is very important that you check the bottoms of your pet’s feet/pads periodically to make sure they are not becoming irritated by the use of the trimmer inserts.
Some say to not leave the sandpaper on the track for long periods of time and other’s use it constantly.
If the rough surface of the sandpaper becomes an irritation, you can alternate it when cleaning the wheel. Example: On one week and off the next.
Do not cover the entire track with sandpaper.
Using sandpaper as a trimmer allows a little more time between manicures. This is not a substitution for regular maintenance and manicures.